[R-390] Question about the Y2K manual... (or how Randy can be dumb as a rock)...

[Randy and Sherry Guttery]

  I'm confused (nothing new)...  so please someone set me in 
the right direction and give me a swift kick.  I'm putting 
my gear train back together (I'll post about some VERY big 
"surprises there another time"...   and using the Y2K 
manual.  On pages 191 - 195 is the zoning chart for the 
exploded gear train shown in 6-36.  Great. should make 
getting the shims, spacer bushings, etc. in the right 
place(s) much easier. Uh-huh.  I start trying to use the 
chart  - and find that what seemed obvious a short time ago 
- now has me totally confused.  I look at the diagram - 
there is a gear set with "call out" (index?) 41.  I look at 
the chart - Index 41 = 1/4 inch retaining ring.  Two shims 
and bushing on the shaft of 41 marked 42 & 43 - but the 
chart lists them as No. 8 riveted gear and 4-40 square nut.

What am I obviously overlooking????

rg - making dumb and dumber looking smart and smarter by the 
day...

-- 

A Tender Tale - a page dedicated to those Ships and Crews
so vital to the United States Silent Service:
http://tendertale.com