[R-390] leftover hardware

[ka9egw at britewerkz.com]

Please don't laugh.  I've got the rx back together and have a few 6-32
screws and washers left over.

This after R&R the PTO, IF and RF decks.

Here's a list of what I know IS installed:

The two that are reached through holes in the front panel of the RF deck,
one above the other, in the middle.

The three that go in the right side of the RF deck, through the chassis
sideplates.

Two on the bottom left side of the RF deck, accessible through the big hole
in the side of the audio deck.

Two on the front of the RF deck that hold the crystal deck in.

None of these are captive 8-32's.  They're all accounted for.

One is absent from the cable clamp on the pto, but that's a known.

Which still leaves me a couople left over and NO visible holes to stick them
in.

Is there a listing somewhere of where all the green screws go in this radio?

TIA & 73
Brian KA9EGW
PS the radio is working fine and the 30dB drop on audio is there when tested
modulation-on/off.