[R-390] R390 Photo Shoot.

[Jeff Adams]

I can put them up on my R390A/SP600 website, and add them to the 
R390/R390A CD ROM if you would like.

Jeff

Jeffrey L. Adams  KG4RZM  Physicist at cox.net

http://www.jeffreyladams.com

Mentor of the R390/R390A CD Archive

Motorola   R390A/URR 1956 14-PH-56    Serial 1409 w/ CY979
Collins    R390A/URR 1952 14214-PH-51 Serial 979 w/ CY979
Collins    R392/URR  1951 3075-PH-51  Serial 252 w/ T195 transmitter
EAC        R390A/URR 1960 23137-PC-60
Hammarlund SP-600-JX-26 1953          Serial 13432
Hammarlund SP-600-JX-17 Diversity     Serial 12384


At 07:51 PM 2/17/2010, Flowertime01 at wmconnect.com wrote:
>Fellows,
>
>I have the camera back and working. My mail is dialup. The reflector does
>not support adding photo's to the mail. I choose not to have a web page.
>
>But I can mail the photo's one at a time to a whole list of you.
>
>I will save all of them and do a disk. When the receiver is done I will
>then make an offer.
>
>I will send a disk to any one that would like to post the whole thing for a
>while on their wed site so those that want the photo's can down load them.
>
>What "shots" do you want to see. Let me have some ideas.  I have Wallace's
>R390 laying all over the bench and just out of the bath.  I can get photo's
>of any part.
>
>As I get the receiver back together and start the alignment I will take
>photo's of the equipment set up and meter's. Hopefully we can get a 
>power point
>slide show out of the exercise.
>
>I'll try and get us some R390 "photo documentation" to go with the R390/A
>knowledge we have accumulated.
>
>If you ask for a photo or just want on the review list I'll put you on the
>slow mail list.
>I'll send you a copy to ensure it's what you had in mind.
>I'll take this off the reflector and go direct to those with an interest.
>
>A couple three mail post a week and photo's and after a month, we should
>have a pretty good how to and photo gallery for the R390. Some feed 
>back along
>the way and it should be readable and useable for the R390 owners
>
>
>Roger AI4NI
></HTML>