[R-390] Filter caps

[Flowertime01 at wmconnect.com]

Fellows,

I am still recycling old used DPTD 8 pin octal relays into new filter caps.

You remove the top off the relay and remove the relay from the octal socket 
by de soldering the relay wires from the octal socket pins. 

Two 47 or three 33 will fit back in the socket covers nicely.

If you want to go under the deck, then rewire and solder the new caps to 
the even number pins on the socket. Then plug the original back into its odd 
number pins.

This looks original and solves the leakage problem.

NOS from AES also sound good.

Roger AI4NI