[R-390] Spiral-making tool website?

[Kim Herron]

Hi Don!!  (et.El.)

     FYI and for your edification, I have a FCC first class engineer that
works for me.  He is very smart, and quite capable of out-thinking most of
us.  He also has use of only ONE hand.  Brain injured in a plane accident.
He makes VERY GOOD use of the aforementioned devices doing chassis rebuild
for me.  Be careful what you say.

Kim Herron W8ZV 
www.goldenradioservice.com
kim.herron at sbcglobal.net
1-616-677-3706

-----Original Message-----
From: r-390-bounces at mailman.qth.net [mailto:r-390-bounces at mailman.qth.net]
On Behalf Of 2002tii
Sent: Thursday, February 19, 2009 9:57 PM
To: 'R-390 List'
Subject: Re: [R-390] Spiral-making tool website?



>To each his own, but I think Hippocrates was onto something when he 
>said the first rule should be "do no harm", and IMHO this approach to 
>component replacement does the job with minimal collateral damage.

In my less-than-tolerant opinion (to quote an old Harley-Davidson 
ad), if one cannot take a solder joint apart, replace a part, and 
return the joint to good-as-(or better-than)-new -- without damaging 
anything -- then one shouldn't be inside electronic equipment with a 
soldering iron.  If one can, but just can't be bothered to do it 
right, one's radios should be confiscated.

With just a little practice, doing it right doesn't even take longer 
than making a quiggle of it!

But yes, to each his own.

Best regards,

Don



______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html