[R-390] Need R-390A Iron Core Slug

[ToddRoberts2001 at aol.com]

In a message dated 8/2/2009 4:27:48 P.M. Eastern  Daylight Time, 
k5mbx at hug-a-bug.com writes:

How does one go about getting  the 
bottom end of the old core out?
Thanks, Charlie Hugg,  K5MBX   

__________________________________________

You  could try using a toothpick with a small drop of
super-glue or quick-set  epoxy on the end. Carefully
place the end of the toothpick on the middle of  the top
of the broken slug, let the glue dry, then pull the broken
slug  out. If the slug broke cleanly you might be able to
glue it back together  with a tiny bit of super-glue. 

Spread a little bit of oil around the  inside of the paper
slug tube in the RF transformer to help prevent the  slug
sticking in the future before replacing the slug in the  rack
assembly.

Worth a try.
73 - Todd WD4NGG  






**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)