[R-390] Need a RF slug for a R-390A

[Flowertime01 at wmconnect.com]

Bob,

The spring thingy can also be solder back together. 
Some acid core solder may be needed.
The adjustment of the triangle should allow for some miss alignment in 
soldering.
The springy thingy can be shorten a thread or two if needed when doing a re 
glue to the slug or resolder to the spline screw.

The springy thingy can be extended a bit with the JB weld or Epoxy if needed.

All RF slugas are not the same. The three in any octave of any one IF are the 
same. Some Octaves are the same as the next Octave. 

If you need a replacement, Do name the Octave you need.

Octaves are { .500 - .999, 1.000 - 1.99, 2.000 -3.999, 4.000 - 7.999, 8.000 - 
15.999, 16.000 31.999 }

Probably more than you any one wanted to know.

Roger AI4NI


> :   
>