[R-390] Need value of R235 from a RF deck

[Barry]

> Replaced about 5 silver micas this evening. Will double check my
> wiring/soldering in the morning. 
> 
> Going to check the circuits in the morning with a frequency counter &
> scope.Might be able to narrow the problem down to the 200KC circuit or the
> multivibrator.
> 
> Note: one of the silver micas (15pF) had a crusty coating on one lead.
> I'vetried to remelt most of the solder joints, but this cap was in a
> positionhard to reach. Had to remove other components to replace it. That's when
> Ifound the crusty coating. Don't know if the solder area was clean, it
> wasdamned hard to remove! It's clean now.
> 
> Craig,

Craig,

I was going to advise just what you're planning.  If you have a good frequency counter, look at the 200kc oscillator while switching bands, modes, etc.  That should tell you if the problem's in the marker or elsewhere.

Good luck with it,
Barry - N4BUQ