[R-390] R390A Local Gain Pot (R105)

[Flowertime01 at wmconnect.com]

Bill,

Worry not about the exact colors of wires.

Get out the schematic and ohm meter.

One end of the Local gain is ground
The wiper goes to pin 1 of plug p120 on the audio deck.

The other end of the pot comes from the sharp wide switch and daisy chains to 
the line gain pot. These three items are all on the front panel.

Some meter checking will help you sort the broken wires out and get them 
fixed.

Try not to do 2 inch extension wires.

Go for 6 or more inches and loop the extension back into the wire harness.
This gets the splice back off the end of the wire, give you some length to 
work with and some wire to make things look neater.

Roger AI4NI   </HTML>