[R-390] Still Deaf below 8 Mc one more question

[Jim Green]

I mentioned in my previous posting Pin 1 of V701 measures 178K Ohms  
and should measure 150K Ohms. I looked at the schematic, and it looks  
to me like this resistance is governed by R701. R701 resistor in the  
receiver was a Brown Green Yellow or 150K resistor. I measured it and  
it measured 178K. Therefore I replaced it with a new resistor that  
measured closer to 150K. Pin 1 now measures 150K Ohms to ground.  
However, tthe DC voltage at Pin 1 remains at around -0.46VDC (should  
be -1.0 to -3.0 VDC according to the manual).

I took another look at the schematic, and on closer inspection R701  
looks like it should be a 150 Ohm resistor. Can this be right? It  
looks like someone forgot to put the K on the resistor value on the  
schematic. Comments?

Jim KG9MM