[R-390] A Few R390A Issues

[Bill & Becky Marvin]

Hi Jim   Thanks for the info. I think I fighting two issues.............the 
DZ mechanism and the 1/5 turn slop before the digits rotate............PTO 
is moving properly, reacts immediately
I took the DZ parts off the front panel, reinstalled the knob and found the 
adjustment still 3/4 before the outer
bushing starts to rotates............rotates the same with hardware is in 
place??  Stripped????housing shaft?

Put lubricant outside/inside bushings.......no change however tuning is easy 
with only a half turn of the DZ knob.

The tuning play is about 1/5 Pto knob before the readout start........left 
or right turn the same. DLk is off..

OH Coupler spring is in place (correct one?)  I'll have to track the gears 
from the OH to  the readout
gears.

This is fun...................thanks to all with solutions provided.


Vry 73

Bill  KB9IV
.