[R-390] Want to buy RF Module part

[DW Holtman]

Hello,

Thanks to the help of this list, I have located the part.  A gentleman I did 
not previously know that lives about 15 moles from me was kind enough to 
give me the gear. Thanks again to everyone who wrote to me.

Best,
DW Holtman
WB7SSN

----- Original Message ----- 
From: "DW Holtman" <tubestuff at comcast.net>
To: "DW Holtman" <tubestuff at comcast.net>; <r-390 at mailman.qth.net>
Sent: Monday, November 05, 2007 7:49 AM
Subject: Re: [R-390] Want to buy RF Module part


> Hello,
>
> I'm still desperately looking for the gear assembly that drives the 
> crystal oscillator module on a R-390A. I has a couple of responses for a 
> picture to show exactly gear it is. Below is a link to a picture showing 
> where it is located.
>
> http://www.heavymetalradios.com/32V-1.html
>
>
>
> It is in the top left part of the gears (looking from the front.). There 
> is no picture of the RF gear train disassembled in the Y2K manual. However 
> in the TM-11-5820-358-34, fig 88 (fold out in the rear of the manual) it 
> shows it. The gear is item # 117. The clamp, screw etc that are normally 
> attached to the gear as an assembly is Items # 113, 114, 115 116 and # 
> 124. Looking at the foldout, it goes into hole "L".
>
> Anyone who has some spare parts or a parts unit, I really need this part. 
> Please get back to me if you have one for sale.
>
> Best,
> DW Holtman
> WB7SSN
>
>
>
> ----- Original Message ----- 
> From: "DW Holtman" <tubestuff at comcast.net>
> To: "DW Holtman" <tubestuff at comcast.net>; <r-390 at mailman.qth.net>
> Cc: <r-390 at mailman.qth.net>
> Sent: Saturday, November 03, 2007 4:24 PM
> Subject: Re: [R-390] Want to buy RF Module part
>
>
>> Hello,
>>
>> One more note, removing this part does not require any disassamely of the 
>> gear train. Just use a number 8 bristol wrench if it is still attached to 
>> the Crystal oscillator module. I can send pictures of the gear on a 
>> complete RF Module if it would help anyone locate the gear in question.
>>
>> Best,
>> DW Holtman
>> WB7SSN
>>
>> ----- Original Message ----- 
>> From: "DW Holtman" <tubestuff at comcast.net>
>> To: <r-390 at mailman.qth.net>
>> Cc: <r-390 at mailman.qth.net>
>> Sent: Saturday, November 03, 2007 5:05 PM
>> Subject: [R-390] Want to buy RF Module part
>>
>>
>>>
>>> Hello,
>>>
>>> I just disassembled a RF Module (from Ebay, where else?) and finally 
>>> figured out that there is a part missing. What I desperately need is the 
>>> gear assembly that drives the crystal oscillator module. It is in the 
>>> top left part of the gears (looking from the front.). There is no 
>>> picture of the RF gear train disassembled in the Y2K manual. However in 
>>> the TM-11-5820-358-34, fig 88 (fold out in the rear of the manual) it 
>>> shows it. The gear is item # 117. The clamp, screw etc that are normally 
>>> attached to the gear as an assembly is Items # 113, 114, 115 116 and # 
>>> 124. Looking at the foldout, it goes into hole "L".
>>>
>>> Anyone who has some spare parts or a parts unit, I really need this 
>>> part. Please get back to me if you have one for sale.
>>>
>>>
>>>
>>> Best,
>>>
>>> DW Holtman
>>>
>>> WB7SSN
>>>
>>>
>>> _____________________________________________________________
>>> R-390 mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/r-390
>>> Help: http://mailman.qth.net/faq.htm
>>> Post: mailto:R-390 at mailman.qth.net
>>> Unsubscribe: http://mailman.qth.net/mailman/options/r-390
>>>
>>
>>
>> _____________________________________________________________
>> R-390 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/r-390
>> Help: http://mailman.qth.net/faq.htm
>> Post: mailto:R-390 at mailman.qth.net
>> Unsubscribe: http://mailman.qth.net/mailman/options/r-390
>>
>
>
>