[R-390] Want to buy RF Module part

[DW Holtman]

Hello,

One more note, removing this part does not require any disassamely of the 
gear train. Just use a number 8 bristol wrench if it is still attached to 
the Crystal oscillator module. I can send pictures of the gear on a complete 
RF Module if it would help anyone locate the gear in question.

Best,
DW Holtman
WB7SSN

----- Original Message ----- 
From: "DW Holtman" <tubestuff at comcast.net>
To: <r-390 at mailman.qth.net>
Cc: <r-390 at mailman.qth.net>
Sent: Saturday, November 03, 2007 5:05 PM
Subject: [R-390] Want to buy RF Module part


>
> Hello,
>
> I just disassembled a RF Module (from Ebay, where else?) and finally 
> figured out that there is a part missing. What I desperately need is the 
> gear assembly that drives the crystal oscillator module. It is in the top 
> left part of the gears (looking from the front.). There is no picture of 
> the RF gear train disassembled in the Y2K manual. However in the 
> TM-11-5820-358-34, fig 88 (fold out in the rear of the manual) it shows 
> it. The gear is item # 117. The clamp, screw etc that are normally 
> attached to the gear as an assembly is Items # 113, 114, 115 116 and # 
> 124. Looking at the foldout, it goes into hole "L".
>
> Anyone who has some spare parts or a parts unit, I really need this part. 
> Please get back to me if you have one for sale.
>
>
>
> Best,
>
> DW Holtman
>
> WB7SSN
>
>
> _____________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:R-390 at mailman.qth.net
> Unsubscribe: http://mailman.qth.net/mailman/options/r-390
>