[R-390] Measuring Sensitivity - Ramblings...

[n4buq at knology.net]

On Sun, 11 Mar 2007 23:00:26 EDT, DJED1 at aol.com wrote :
 
> Barry-  I think you have to ground the other pin on the balanced  
connector 
> to get good results.  What makes sense is to measure with the  same setup 
you 
> aligned with (or vice versa). Sounds like you're closing in on a  
reliable test.
> Ed  WB2LHI

Ed,

Yep, grounding the other pin definitely made a difference in the signal 
levels.

Barry - N4BUQ