[R-390] Carrier-level adjustment pot?

[Craig C. Heaton]

Barry,

I think in the archives someone posted the Clarostat 73JA 100 ohm 2 watt ten
turn pot was the real McCoy.

Craig,

-----Original Message-----
From: r-390-bounces at mailman.qth.net
[mailto:r-390-bounces at mailman.qth.net]On Behalf Of Barry
Sent: Tuesday, January 23, 2007 7:58 PM
To: R-390-List
Subject: [R-390] Carrier-level adjustment pot?


Can someone tell me which 10-turn pot they've used to replace the
carrier-level pot in the R390A?  I ordered one, but the little solder tabs
are pretty small.  Considering two of the original pins had two wires
running to it, one of which is the 1W resistor, the holes in this pot aren't
really big enough for the job.  I think I ran into this with my first
replacement in my other radio and I ended up soldering to the resistor lead
and/or jumper wire, but don't remember.  Is there a pot that has holes big
enough to do the job and will still fit under the housing?

Thanks,

Barry - N4BUQ

_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390