[R-390] anodize or not

[DW Holtman]

Scott,

I don't think it can be bought in a spary can. But it can be done at home. 
Here is a link to an aviation supplier that sells the materials to do it.

http://www.aircraftspruce.com/menus/cs/metalprepsupplies.html

Taking all of the pieces from an R-390A cabinet (PTO cover etc) and having 
it professionally done runs around 40 to 50 dollars. Take a look in your 
local yellow pages. The only catch is you must spend a lot of time sanding 
with very fine sandpaper to remove ALL scratches. Any defects will show up 
in the finished product.

Hope this helps.

Best,
DW Holtman
WB7SSN
http://www.heavymetalradios.com/

----- Original Message ----- 
From: "Scott Bauer" <odyslim at comcast.net>
To: "R-390 List" <r-390 at mailman.qth.net>
Sent: Sunday, December 16, 2007 6:28 PM
Subject: [R-390] anodize or not


> Can one purchase anodize to re-finish side panels in a spray can?
>
> Thanks
> _____________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:R-390 at mailman.qth.net
> Unsubscribe: http://mailman.qth.net/mailman/options/r-390