[R-390] R&S SSB Adapter

[Dan Arney]

Barry,
It is 300 KC which is the IF output of the EK-07 0.1V EMF 250 ohms.
That unit worked when I got it in from Germany it is a rack mount 
version or the NZ-10.  I think it is also the SSB part of the EK-3101 
diversity unit of which I now have three of, plus 2 NZ-10s and 6 EK-07's
which I should be able to check all of them out in the next week or 10 
days. After nearly a year of trying to find an electrician to wire my 
shop correctly it looks like I will get it inspected and powered up by 
the first of the week.

The first guy trenched, buried PVC, ran new 2/O cable 98 ft double 
lugged it on a single lug meter and put the disconnect at the 200 Amp 
load center in the shop. All a Code no no. Plus the trench was not 
straight so I now have 3 runs of 2/O 82 ft and 3 runs 97 ft that adds up 
to a wad of cash at todays prices of copper. The Crowning glory of this 
is that ONCOR ex TXU is providing pole to shop trenching, cable and all 
labor for free to the meter box for 200 Amp service. So as soon as it is 
inspected they will hook me up.

Still fighting the redneck mayor and city hall on my Sky Needle/SteppIR 
Monster along with 2 ele 75M yagi. We are taking them to Federal Court 
under PRB-1 to get the permit for the tower. They have a 35 ft height 
restriction which they ignore if you play kiss A** to the mayor. His 
buddy has a 65 ft commercial no permit tower up for Wireless Internet 
service.
So I will have plenty to do shortly.
How B U?
  73
  Hank
KN6DI