[R-390] Two questions

[Keith Densmore]

I'd like to thank everyone who offered help and suggestions on the two
problems. I have printed the replies and have them with the  manual so they
will be at hand during the rebuild.

73, tnx,
Keith


----- Original Message -----
From: Cecil Acuff <chacuff at cableone.net>
To: Walter Wilson <wewilsonjr at gmail.com>; Keith Densmore
<densmore at idirect.com>
Cc: <r-390 at mailman.qth.net>
Sent: Thursday, April 12, 2007 10:30 AM
Subject: Re: [R-390] Two questions


> Good point Walter....I ran into that a while back and when this happens
you
> need to change the fixed cap to get things into the range of the trimmer.
> It made quite a difference.
>
> Got to have two peaks....don't matter which one you adjust to.
>
> Cecil...
> ----- Original Message -----
> From: "Walter Wilson" <wewilsonjr at gmail.com>
> To: "Keith Densmore" <densmore at idirect.com>
> Cc: <r-390 at mailman.qth.net>
> Sent: Thursday, April 12, 2007 8:25 AM
> Subject: Re: [R-390] Two questions
>
>
> >> 2/Lower sensitivity on the 7 mcs band compared to all other nearby
bands.
> >> Does not appear to be the band switch, it makes positive contact on all
> >> ranges.  I thought might be alignment of the  7-24 mcs crystal but it
> >> peaks nicely with its trimmer. Any thoughts?
> >>
> > Make sure it will peak in TWO spots during a full rotation.  If it
> > only peaks in one spot, that's not a true peak.
> >
> > Walter - KK4DF
> > _____________________________________________________________
> > R-390 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/r-390
> > Help: http://mailman.qth.net/faq.htm
> > Post: mailto:R-390 at mailman.qth.net
> > Unsubscribe: http://mailman.qth.net/mailman/options/r-390
> >
>
>
>