[R-390] AGC Problem

[Flowertime01 at wmconnect.com]

Jon,

These things can some times be fixed.

The little wire breaks off in the can.
The cans have large wires that go from top to bottom and make up the bottom
terminal under the deck. In the can, the little coil wire comes out and is 
wrapped around this larger wire. Often the little coil wire opens. It hangs in 
free space between the coil of wire and the larger wire post. Vibration does 
the free hanging wire in. These things also do cold solder joints.

Pull the deck out so you can get it under the magnifying glass. 
Pull the cover off the offending can.
Give it the real eye ball and set what come loose.

If you ohm it and find the coil open inside, you can still do a can 
transplant.

That's a good after noon once you get a new to you used transformer.

Just takes time to get er done.
Not real hard just a long job.

Roger. AI4NI