[R-390] Screw driver for RF deck mounting screws??

[TChirhart]

Your local Sears (Craftsmen) has the extended shaft Phillips and blade
tip screw drivers that work great. Every 390 tool box should have them.


-----Original Message-----
From: r-390-bounces at mailman.qth.net
[mailto:r-390-bounces at mailman.qth.net] On Behalf Of Jim M.
Sent: Tuesday, September 05, 2006 5:06 AM
To: Steve & Carol; R-390 at mailman.qth.net
Subject: Re: [R-390] Screw driver for RF deck mounting screws??

I found a long skinny thin 'flat head; driver at Ace hardware.  It's not

Phillips but the flat head was small enough to get a decent grip on the
RF 
deck screw.


----- Original Message ----- 
From: "Steve & Carol" <srosenb2 at nycap.rr.com>
To: <R-390 at mailman.qth.net>
Sent: Monday, September 04, 2006 11:56 PM
Subject: [R-390] Screw driver for RF deck mounting screws??


Hi Guy's,

Anybody know where to get a Phillips head screw driver long enough and
the 
right size for the left rear screw on the RF deck?
I picked up a #2 with a 6" x 1/4" shaft which is fine for the right rear

screw but can't engage the left one because the shaft is to fat. I got
that 
one from a Lowe's home store.

Steve,
WA2TTP
_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390 

_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390