[R-390] R-390A front mounting panel hardware source?
Rbethman
rbethman at comcast.net
Tue Aug 22 17:23:32 EDT 2006
Gang,
Now that Dave Medley (sp?) is out of the "biz, whom is a current
supplier of the stainless screws and "cone" washers?
I've been working off (mostly!) and on for three or four years on a St.
J's massacre Collins built R-390A. It does have a Cosmos PTO though.
I have an engraved panel that I'm painstakingly hand painting the
engraving on.
Just about time to start re-assembly. FINALLY!
Thanks in advance!
You can reply direct if you think it will only clutter up the list.
Bob - N0Dumb Georgia Nut! (N0DGN)
--
Bob Bethman - NØDGN
+------------------------------------------------------------------+
| REAL Tube Radio and AM |
+------------------------------------------------------------------+
| Manassas Radio - Home of Homemade Kielbasa & Pirogi |
+-------------------------------+----------------------------------+
| Bob Bethman \\\|/// " The absence of a danger |
| rbethman(at)comcast.net \\ ~ ~ // signal does *NOT* mean |
| (/ @ @ /) that everything is OK " |
+-------------------------oOOo-(_)-oOOo----------------------------+
| <http://home.comcast.net/~rbethman> |
| <http://home.comcast.net/~rbethman/BC-610.html> |
| BC-61ØI w/BC-614I, T-213/GRC-26 w/BC614I '51 Collins R-390A |
| SP-600/NR Type 159, Heath DX-60, Apache, Mohawk, SX-101, HT-32A |
+------------------------------------------------------------------+
| Amateur Astronomer - Celestron Nexstar 8 - Megrez 80mm SD II |
| 12" f5 Dob coming soon! Being built |
| 38 Deg 46'48.62"' N - 77 Deg 28'26.89" W |
+------------------------------------------------------------------+
| Opinions expressed are that of my own and do not necessarily |
| coincide with or represent those of ANYONE else |
+------------------------------------------------------------------+
| ALL E-mail received and sent scanned by Windows OneCare Live |
+------------------------------------------------------------------+
More information about the R-390
mailing list