[R-390] TS352 Meter

[Barry]

If these are standard pin jacks and tips, Mouser sells them.  You might not
be able to have the #4-40 threaded tips, but I would think you could use a
standard probe tip and use a pin plug on the other end.

Barry(III) - N4BUQ

----- Original Message ----- 
From: <Flowertime01 at wmconnect.com>
To: <r-390 at mailman.qth.net>
Sent: Monday, March 21, 2005 10:58 PM
Subject: [R-390] TS352 Meter


> Fellows,
>
> Yes, that was the meter with all the pin jacks. We used them on the bench
and
> dragged them out to the bays. We liked them better than the 505 because
you
> did not need to plug them into the AC line.
>
> The real problem with them was the probe tips. You forgot what you were
doing
> and pulled the meter over. Likely as not you would break the pin off at
the
> meter. Both ends of the test lead used the same probe tip. (also the same
pin
> tip as used on the TS-505) The meter end of the lead had a short 1 inch
plastic
> selves. While the user end of the lead had a 4 or 5 inch plastic selves.
>
> The tips were plated brass and threaded as 4x40. The tips would bend easy
and
> break even more easily.
>
> Any one know where we can get the probe tips from today?
>
> Roger L. Ruszkowski KC6TRU
>
> _____________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:R-390 at mailman.qth.net
> Unsubscribe: http://mailman.qth.net/mailman/options/r-390
>