[R-390] Signal Generator Impedence Questions

[Tom Norris]

Will a standard IEEE Cat5 #30 damp sheep improve
the signal isolation of should I use the procedure as
outlined in TO 31R2-2BA-H121? The Air Force method
is identical to the IEEE procedure but adds a Kielbasa
to section 12, step 2.


On Jun 2, 2005, at 8:52 PM, Michael Murphy wrote:
> From: *TM 11-5820-358-10
> Using a variac to make fine generator adjustments when testing into  
> your
> cellular phone..
>
>
> ----- Original Message -----
> From: <Flowertime01 at wmconnect.com>
>
> Subject: Re: [R-390] Signal Generator Impedence Questions
>
>> Dave,
>>
>> OK, what you fellows say about the generator is good.
>>
>> Barry must have a poor IF / Audio chain as he is
>> not getting a good  -7 volts and generator cable set up is OK.
>>
>> Once Barry does a once over on the front panel to make sure
>> he has the Knobs set right. MGC, BFO OFF, 2KC, Audio and RF gain to
>> max and limiter really set off, then he has to look at the cable.
>>
>> I would hate for him to have a bum mini bnc adapter cable giving him
>>