[R-390] R-390 (NON A)

[JMILLER1706 at cfl.rr.com]

Never mind, should have read the rest of the thread before responding.

----- Original Message -----
From: <JMILLER1706 at cfl.rr.com>
Date: Thursday, June 2, 2005 3:21 pm
Subject: Re: [R-390] R-390 (NON A)

> Could this be an AGC problem?  I seem to recall on my 390a that 
> when I 
> turned AGC off (MAN), is the radio saturated with strong signals 
> th 
> meter would tend to either stop moving upward or actually drop.  
> Obvious question is: Do you have AGC enabled?
> 
> ----- Original Message -----
> From: Patrick <brookbank at triad.rr.com>
> Date: Wednesday, June 1, 2005 6:08 pm
> Subject: [R-390] R-390 (NON A)
> 
> > Have a r-390 that have just finished working on it, replaced 
> > defective PTO, Crystal calibrator, checked all tubes and 
> replaced 
> > some weak ones, then aligned it. It work great, But the carrier 
> > lever meter works backwards, the stronger the signal, the less 
> the 
> > indication on the meter. Have replaced the meter and there is no 
> > change.Can someone put me on the right track for this problem?
> > 
> > Thanks in advance for any and all suggestions,
> > 
> > Pat
> > _____________________________________________________________
> > R-390 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/r-390
> > Help: http://mailman.qth.net/faq.htm
> > Post: mailto:R-390 at mailman.qth.net
> > Unsubscribe: http://mailman.qth.net/mailman/options/r-390
> > 
>