[R-390] re: wiring harness.

[WD5JWY]

FYI - from looking at the schematic, R124 is used as a current limiting
resistor and supplies current to both I101 and I102 (dial lamps) from the
6.3 volt winding on T801 (power supply chassis).  If R124 is open, both I101
and I102 should not be working.  Possibly one of the lights developed an
internal short which forced R124 to act like a fuse and burn open.  I would
check and/or replace the dial lamps prior to replacing R124.  The dial lamps
are both type #328 bulbs, by the way.  Just some thoughts.

Good luck.
73

de, WD5JWY
Dennis Pharr
Oklahoma City
 


-----Original Message-----
From: r-390-bounces at mailman.qth.net [mailto:r-390-bounces at mailman.qth.net]
On Behalf Of richard may
Sent: Wednesday, January 05, 2005 9:34 PM
To: r-390 at mailman.qth.net
Subject: [R-390] re: wiring harness.


Sorry, that should read "resistor R124" ,  Richard

_____________________________________________________________
Win a new Icom IC-756PROIII and help QSL/QTH.net
Details at: http://mailman.qth.net/index.html
_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390