[R-390] T-205 Core needed (390-A)

[David Humbertson]

I have been able to repair all of these that I have run across. I use 5
minute epoxy and have never had one break the 2nd time. The trick is to
rig up a little jig ahead of time for the 10 min or so that the epoxy
needs to set up. Its sort of tricky getting the shaft screw to stand up
straight but it can be done. I usually use my Pana-vise.  Sort of build
up a little bead from the top of the core up the little flexible shaft.
Don't get any on the side of the core. Even if you pick up a replacement
later on, this will give you an emergency spare.

Dave - W3NP

-----Original Message-----
From: r-390-bounces at mailman.qth.net
[mailto:r-390-bounces at mailman.qth.net] On Behalf Of Dennis L. Wade
Sent: Sunday, January 02, 2005 9:17 PM
To: R-390 reflector
Subject: [R-390] T-205 Core needed (390-A)

Happy New Year All

	During the cleaning of the 8-16 mc/s slug rack, the core of
T-205 broke 
off of its adjusting screw.  Anyone have an extra core/adjusting screw 
assembly I can purchase?

               Thanks....Dennis

Dennis Wade
KG6ZI
Carmichael, CA
_____________________________________________________________
Win a new Icom IC-756PROIII and help QSL/QTH.net
Details at: http://mailman.qth.net/index.html
_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390