[R-390] wrong part in RF deck found
JamesMiller
[email protected]
Sat, 31 Jan 2004 05:41:31 -0500
It is SUPPOSED to be .033 according to common wisdom, so it was assembled
correctly. Maybe the schematics are printed wrong in some cases, showing an
incorrect value of .003. When you thnk about it, a B+ bypass should be
hefty in value, like .01 to .05. The smaller value .003-.005 doesn't make
sense. Put a .033 Orange drop in there.
Jim
----- Original Message -----
From: "Tom Norris" <[email protected]>
To: <[email protected]>
Sent: Saturday, January 31, 2004 2:45 AM
Subject: [R-390] wrong part in RF deck found
> This is an addendum to my last post about poking around the
> RF deck of the 63 Imperial --
>
> I found a wrong part that looked as if it were there from production.
> C275, originally a .005 mf, changed to .003 mf somewhere along the lines
> according the mod notes in the TM. In mine it was a *.033 mf* big old
paper
> cap. It's just a bypass on the B+ to the first mixer, but still...
> That big sheep lovin' BBOD appeared to have been there since the deck
> was put together and not just a maintenance mistake. In fact the whole
radio
> doesn't look like it saw much use or maintenance at all. Other than a big
Navy
> ID tag glued on the front, along with an engraved tag that says "RCVR 1"
under
> the KC knob, the thing looked like it just came out of its crate.
> It's worked fine
> for me the past ten years or so, so it should keep on ticking for
> quite a few more
> years.
>
> 73
>
> Tom KA4RKT
>
> _______________________________________________
> R-390 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/r-390