[R-390] need help

[Scott, Barry (Clyde B)]

Scott,

My first R390A did the same thing.  The tiny "button" on the microswitch was
stuck in the "down" position.  I moved it a bit further down with a flat
instrument and let it snap back out a couple of times.  It was fixed.  Easy.

If yours doesn't come back to life that easily, then you might have to
disassemble and fix as others have suggested or buy a replacement.

Good luck,

Barry(III) - N4BUQ

 Hi Gang,

 I wonder if someone can point me in the right direction. First I 
will tell you that I do not have much experience with these rigs.
 
 The lamp in my 390A stays on even when the power is turned
off. It seems logical to check out the power switch with an ohm 
meter. I wonder if someone has had this problem before? I would
like to aviod taking the front panel off if possible. I do hear a relay
clicking when I turn it on and off. 

 I do have a  manual somewhere but cant find it at the moment. I 
just totally re-modeled my radio room and cant find anything right
now. 

 Thanks for any advise.  Scott ( another Scott )

_______________________________________________
R-390 mailing list
R-390@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-390