[R-390] R-392 humidity

[g4gjl]

Thanks, Rich. I will check out that plug.... I assumed it was an access port
for the tuning mech!

. I opened the RX after the last postings to let out the wet air....Im not
sure that is the cure as the present air is probably just as wet....But the
Silica Gel should nail it.

Hazards of living on a fog bound island in the middle of the North Sea!!!

73

Pete
----- Original Message -----
From: "Richard M. MC Clung" <wa6knw@sbcglobal.net>
To: <r-390@mailman.qth.net>
Sent: Sunday, June 08, 2003 7:46 PM
Subject: [R-390] R-392 humidity


> > When my R392 has been on for an hour or two the tuning window fogs up
> > with internal condensation.
> > How can that be prevented?
> > Peter G4GJL
>
> If I remember there is a hexhead plug just below the dial window
> eschteon centered on the front panel.  If memory serves me this is a
> venting plug.  You could also put a small bag of silica jell in the
> receiver to absorb any incidental humidity and of course periodically
> replace and recharge it.
>
> RICH  WA6KNW
>
> _______________________________________________
> R-390 mailing list
> R-390@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-390