[R-390] RE: PTO endpoints
Jim Brannigan
[email protected]
Tue, 07 Jan 2003 17:10:46 -0500
Thanks Roy,
The notes will be helpful. I've repaired S-line PTO's, so I'm over the
nervous part.
Dave Wise's note on the slug is good news.
The PTO will go on the back burner for now. The 3rd mixer on my deck was
changed to a 6BE6, I'm going to put the 6C4 back in.
Jim
> At 08:09 AM 1/7/03 -0500, you wrote:
> >The "junke box" has some cores that may fit the coil, but they are of
> >unknown permeability.
> >Has anyone else run into this problem?
>
> Jim,
>
> No not yet, but I have a number of Cosmos PTO's here that will eventually
> get a full restoration, so I am interested in your experience.
>
> Some folks have had to change the number of turns on the endpoint
> adjustment coil, removing one turn often does the trick.
>
> I have attached my notes file on R-390 PTO's in case it helps you.
>
> Roy