[R-390] R-390A glass window

[Scott, Barry (Clyde B)]

If memory serves, a microscope slide is 1" wide.  The curvature of the inside of the escutcheon was such that the slide did not lay flatly against the window opening.  I think I trimmed about 1/4" off the side with a glass cutter.

Barry(III) - N4BUQ


The glass measures 3 inches by 3/4 inch.  Since
it is held in place by clips and the ends, the 3/4 inch
measurement could actually go to slightly over an
inch and the glass would still fit.  Just be careful not
to lose those clips that hold the clamping fingers
in place.

73, Phil
W5BVB