[R-390] Success: synching the 8-16 mHz rack

[Tom Bridgers]

Fellow Anchorites...
Tom Marcotte's advice solved the problem:  loosen all clamps for all cams.
That frees up the 8-16 mHz cam ... and so it did.  Removing the 12 springs
and repositioning all 6 cams to line up with their associated black line was
then a breeze.

I tightened clamps from left to right ... and had no problem keeping the
cams aligned.  Reattached the springs, and voila, the once dead EAC
presented me with faint signals on every band.

I then found that whoever had been there before me had misaligned virtually
everything.  After carefully realigning the crystal deck on each band and
all adjustables on the RF deck by category, the radio came alive with strong
signals on every band!

73's,
-tom