[R-390] Solid State Mods

[Don Reaves W5OR]

Ahem!  Contrary to expressed opinions (not just you, Phil) there is NO
prohibition on this list regarding modifications to the R-390.  Some folks
don't LIKE the mods, and express their opinions, but if its on topic and
isn't just to stir pots, then its quite reasonable fodder for thought and
discussion.  I think the general consensus is that a full solid state mod of
all the tube circuits in the R-390 would be a major undertaking with no
guarantee of results.

I have an R-388 that was almost fully solid stated, and it quit working
before I had a chance to analyze how well (or badly) it performed next to an
original one.   I have no documentation on the mods, and there are lots of
'loose ends' in the receiver.  With too much ripped out to ever put it back
together (the R-388 is not modular like the R-390 series), a kluged on
Collins mechanical filter adaptor that sticks up over the top panel, and
several homebrew printed circuit boards it is quite a sight.  It is
certainly an example of how a project can go awry.

>
> And do you 'really' think that I'd have the nerve to post such a
> desecration to this reflector ??
> 73 de Phil  KO6BB
>

------------------------------------
Don Reaves  R-390 list administrator
<mailto:r-390-admin@mailman.qth.net>
R-390 Mailing List Rules:
1.  Stay on topic
2.  Be civil and courteous
------------------------------------