[R-390] Need CV-591A Relay Cover Measurements

[Ray, W2EC]

Mike,

I've attached a picture of the one in my CV-591A. The overall dimensions
are 2-5/8" wide by 3-11/16" deep by 2-1/2" high. As you can see from the
picture, there are two "cutouts" at the bottom of the shield for the
wires to enter. On the front, the cutout is the full width of the shield
box (2-5/8") and the opening is 1-7/16" high. On the left side (as
viewed from the front of the CV-591A) is another opening for wires. This
opening is in the shape of a rectangle, also 1-7/16" high like the
opening on the front and extends towards the back of the shield 1".
There are threaded studs attached to the shield bottom with rivets, the
studs project through the chassis so nuts can be attached under the
chassis to fasten the shield down. Hope that all makes sense.

73, Ray  W2EC

Michael Melland wrote:

 > Might someone measure one they have and email the info to me so I can
 > have the metal shop here at work make one for me ?  Or any one have a
 > cover for sale .....
 >
 > Mike
 >
 >
 > --
 > Michael Melland, W9WIS
 > Winneconne, WI USA
 > _______________________________________________
 > R-390 mailing list
 > R-390@mailman.qth.net
 > http://mailman.qth.net/mailman/listinfo/r-390
 >




--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  image/jpeg
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---