[R-390] Re: Help On Installing R-390 in CY-979A

[Jim M.]

I too would like to know what to do about the rails.  I can't figure out
where they go.  I have the shock mounts installed on the bottom of the
cabinet, and the unit is just sitting on the flat sides of the 4 shocks
now.  On the mounting rail that came with the cabinet, the holes don't
line up with anything I can see.  

Also, the front panel holes don't center with the holes on the radio
front panel on the left side, they seemed to be about 1/32 inch too low
on the left side (either that or the radio is warped).  I had to pound
on the inside rail and do some sanding/filing to bring it down.  Any
ideas?

N4BE

Damon Raphael wrote:
> 
> Thanx to the multitude who sent me emails on howto do it.  I removed both
> covers.
> The R-390 looks and sounds great in its new suit.
> 
> I couldn't figure out what to do with the "rails"  Looks like they were
> drilled for a different set of shock mounts.
> 
> Damon, W7MD
> 
> _______________________________________________
> R-390 mailing list
> R-390@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-390