[R-390] Wiring harness clamps needed
rbethman
[email protected]
Sat, 23 Nov 2002 03:45:36 -0500
Barry,
Try Aircraft Spruce & Specialty. http://www.aircraft-spruce.com/
What you are looking for are MS-21919 clamps. "Loop type cushioned
aluminum, alloy clamp for tubing or conduit. Cushion (non-fuel resistant)
is bonded to surface and edges of clamp. Cushion assures tight fit and
eliminates vibration, thereby preventing line abrasion."
They have a Griffin, GA and a Corona, CA location.
There is a -XX, where the XX is a number that determines the inner
diameter.
I did NOT see a minimum order requirement!
The cheapest size is $0.40, and the most expensive is $4.95 for a 3"
Bob - N0DGN
----- Original Message -----
From: "Scott, Barry (Clyde B)" <[email protected]>
To: "R390 (E-mail)" <[email protected]>
Sent: Wednesday, November 20, 2002 8:57 AM
Subject: RE: [R-390] Wiring harness clamps needed
> Bingo. That's what they are. Now to find them w/o a $20 minimum order.
:(
>
> Hopefully I can find them locally.
>
> Thanks!
>
> Barry - N4BUQ
>
>
> > Hi Barry and Group,
> >
> > What you are probably looking for are called "Adel
> > Clamps" They are
> > used extensively in the aircraft industry...some have teflon
> > inserts others
> > rubber, some are aluminum others stainless...they come in all
> > sizes and
> > should not be too hard to find! A Google search should turn
> > up several
> > sources!
> >
> > Cecil...
> >
> >
> > ----- Original Message -----
> > From: Scott, Barry (Clyde B) <[email protected]>
> > To: R390 (E-mail) <[email protected]>
> > Sent: Tuesday, November 19, 2002 8:32 AM
> > Subject: [R-390] Wiring harness clamps needed
> >
> >
> > > Does anyone know if the wiring harness clamps and their
> > rubber inserts are
> > available anywhere? These are the ones that that are used to
> > secure the
> > harness to the front panel and the frame. I have a radio
> > where these clamps
> > disentegrated over time and when I cleaned the frame and harness, they
> > simply crumbled to nearly nothingness. Perhaps these are
> > still available
> > new?
> > >
> > > Thanks,
> > >
> > > Barry - N4BUQ
> > >
> > > _______________________________________________
> > > R-390 mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/r-390
> >
> _______________________________________________
> R-390 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/r-390