[R-390] Info : CV-591A needed

Wed, 15 May 2002 10:40:10 -0500 (CDT)

I believe you need a MS3106A16S-5S with clamp AN3057-8

On Wed, 15 May 2002, Tom Norris wrote:

> this is a standard "type 97" or "MS" connector. I don't remember the
> exact number, but The numbering system is simple enough --
> The part you are looking for is most likely an MS3106AXXX S
> with the XXX being the number than is on the insert in the mating
> chassis plug. I forget the specific number for the insert that you
> need to mate to the connector on the 591A, have been a while since
> I have had one.
> 
> One source for the connectors is www.newark.com, request a
> catalog since they have lots of nifty stuff. Don't let the cost of the
> connectors scare you, expect to pay about $10-15 for a complete/
> new connector. But years from now when CV-591A's are impossible
> to find, instead of just difficult like they are now, you will thank yourself
> for not snipping the connector off and direct wiring any old AC cord
> in there.
> 
> 73
> 
> Tom Norris KA4RKT
> 
> At 09:42 AM 5/13/2002, you wrote:
> >Sorry for the slightly off topic post! Can anyone tell me what the power
> >connector on the back of this set is?  i.e. what the military nomenclature
> >is? I need one for mine, also need the type lamp for the pilot as well as
> >the lamps for the sideband lumination. Unfortunately it needs some work! Are
> >there any online copies of the manual?
> >
> >Thank you,
> >Joe
> >
> >_______________________________________________
> >R-390 mailing list
> >[email protected]
> >http://mailman.qth.net/mailman/listinfo/r-390
> 
> _______________________________________________
> R-390 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/r-390
> 