[R-390] Signal Generator wanted

[G4GJL@aol.com]

Ronnie,

I can verify that this technique works well in 2002 over here in England!

I just went through all but the 455kc alignments on my Blue Streak III 
project without as much as a glimmer of power on the signal generator!

 In my case this was more out of laziness and inability to lift the sig gen 
onto the bench due to medical conditions, but I often use this method as a 
first pass at alignment of a rebuilt rig.

In the specific case of my 390A, I would find it hard to believe that audibly 
better performance could be achieved even with instruments. It sounds so 
great in its present state!.

Unless there has been major surgery in the final IF, I would suggest there is 
no likely significant improvement in performance to be had by touching the 
final 455kc IF, with or without instruments. Thos mechanical filters define 
the bandwidths and shape factors very convincingly any how.

73

Pete
G4GJL


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---