[R-390] Touch Up Paint for R390(A) Front Panel

[scott]

The color of the panel is as big a guess as the manufacturer.  There were
probably 100's of shades of gray used between the factory finishes and the
re-painting at the depot.  My suggestion would be go to a high quality paint
dealer and they will have a computer that will read the existing color of
your panel.  They can then mix a quart that will be a near perfect match.
Should cost about $12 or so.  I prefer Benjamin Moore paints for this.  Have
them mix SATIN Impervo unless the panel has a noticable sheen.  You can
always re-paint the panel and have a "like new" front.  Feel free to e-mail
me any questions.

Scott







----- Original Message -----
From: "Dulaff, Paul" <PDulaff@dpconline.com>
To: <r-390@mailman.qth.net>
Sent: Wednesday, July 24, 2002 1:42 PM
Subject: [R-390] Touch Up Paint for R390(A) Front Panel


> Thanks all for the info on how to determine manufacture of the R390(A). I
> will know more when I tear down the rig and inspect modules and the
counter.
>
> I have a second question. I need a source of touch up paint to match the
> front panel gray color. Anybody know if touch up paint is available for
the
> front panel ?
>
> Many Thanks
>
> Paul - WB2NMI
>
>
>
>
> _______________________________________________
> R-390 mailing list
> R-390@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-390