[R-390] Line Meter wiring

[David Wise]

> From: Alex McDonald [mailto:amcdonald@toyodatrw.com]
> 
> Hello All,
> I have a blue-striper which I received without meters. In attempt to
> hook up a meter I found that 3 wires were cut for the line 
> meter. I can
> only find 2 wires listed to connect to the meter on a schematic that I
> have, (no wire color code specified). 
> My wires come out of a tightly bound pack. They are white wires with a
> single stripe each of black, red and orange. The black one seems to
> originate from somewhere low in the radio.
> I assume that 2 of the wires hook to a single post on the meter.
> Does anyone know the correct setup of these wires to the meter?

Download the Y2K R-390A manual from the FAQ site, Alex.
Page 6-83, Figure 6-35 Radio Receiver R-390A/URR, Main Frame Wiring Diagram
(Sheet 1 of 2).

The White/Red goes to meter minus, the two White/Black/Orange go
the plus.

Regards,
Dave Wise