[R-390] carrier level meter

[Walter Wilson]

Joe,

Check the resistor from pin 3 to ground on V506.  It should be 27 ohms.
Fair Radio changes out this resistor to give their substitute meters enough
drive.  It's possible your IF deck has had this resistor swapped out in its
past life.

Walter Wilson - KK4DF
http://r-390a.us
(REAL Radios: R-390A, R-390, T-368E, Ranger, Thunderbolt, KWM-2A)

----- Original Message -----
From: "Joel Richey" <richey2@mindspring.com>
To: <r-390@mailman.qth.net>
Sent: Saturday, December 28, 2002 11:25 AM
Subject: [R-390] carrier level meter


Happy holidays to everone, I just rebuilt a 390A and it works great except
for an over active cxr meter, it reads full scale on average signals, AGC
action is good and have tried all tubes associated with this ckt to no
avail, voltage measurments are good and reciever plays very good other the
the meter pegging on average sigs, anyone had this problem before???
  tnx Joe W2DBO


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
R-390 mailing list
R-390@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-390