[R-390] Hammarlund HX-500 Help Needed

[Jon & Valerie Oldenburg]

With the new H.F. antenna completed ( Hygain HT-18 HyTower 54' vertical) =
and performing well, today it was time to start getting my Hammarlund =
station on the air.  The work on the HX-500 Transmitter went very well =
today, test the tubes, resolder a few areas of old repairs & mods, a =
slow start up on a VARIAC and all is well, good sounding rig putting out =
a solid 100 watts key down in CW, the SSB sounds very good also. I have =
a HQ-170 to match up with it, but here's the clincher. The rear panel of =
the HX-500 has a 14 pin ( well blade actually) socket for the cable to =
interconnect the station. The plug measures 2 3/16 w x 3/4h , there  are =
7 horizontal lugs over 7 vertical lugs.I have a copy of the manual (and =
the factory mods bulittens) for the rig but they don't list a part =
number.  Anyone have a spare, or a source for this?                      =
                                                                        =
Thanks in advance Jon AB9AH                                              =
                                           =20
"If everything seems under control, you're just not going fast enough."=20
 - Mario Andretti


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---