[R-390] Slug rack question

Tue, 27 Aug 2002 14:56:03 -0700 (PDT)

Yes, that's all there is to it!

I used a dental pick to access the little hole in the
cam so that I could drag it into alignment.

I think the rear cams are run off the front cam shafts
but I can't remember and my two radios are either in
the rack or packed in a box.

Joe

--- Philip B Atchley <[email protected]> wrote:
> Hello
> I'm putting the final touches on this RF deck.  I
> went to the 7+0000
> position and notice I have two cams that are off a
> little.  the 4.0-8.0
> cam is probably off by about 1/4-3/8 inches.  The
> 16-32 cam is probably
> about 1/4" or a little less off.  Never had to
> correct one of these
> before.  I 'presume' that I just loosen the gear
> clamp, position the cam
> where I want it and retighten the clamp?  
> 
> Also, I don't see any marks visible on the rear two
> racks.  Can these be
> checked for a "high point" or "low point" at a known
> frequency?  
>     
> 73 de Phil  KO6BB
> Loving home provided for wayward Boatanchor
> Receivers
> [email protected]
> Merced, Central California
> 37.18N  120.29W  CM97sh
> 
>
________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for
> less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> _______________________________________________
> R-390 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/r-390

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com