[R-390] Audio resistors?

Sat, 29 Dec 2001 10:27:23 -0500

I read some off the threads here and find them funny.
Audiophiles guys are the worst !
One guy around here pays $300 for "Golden Dragon" (Sino Chinese) 12AX7 for
his tube mic's,
I can get them bulk boxed without the fancy silk-screening and screening for
$60 a dozen but usually have to throw away half
My main gig is working on guitar amps that have many stages of soaring gain.
Go with regular carbon and double the MFD use polypro orange drops for the
coupling.
If you want to get into it you can look for a strong Mullard "pull" 12AU7
with matching triodes.
That "WILL" sound great audio especially in the non A.
If you one of the guys with SS diodes and 200 ohm resistor replacing the
26Z5:
Cranking the audio loud with a strong 12A*7's in the audio section the set's
PTO may frequency modulate to the audio.
Use a Variac and no resistor with diodes
jOE

-----Original Message-----
From: blw <[email protected]>
To: [email protected] <[email protected]>
Date: Saturday, December 29, 2001 12:24 AM
Subject: [R-390] Audio resistors?

>What are the quietest or best resistors for pure audio use? I need to
>replace some in an amplifier and also in an AF deck that has problems. I
may
>as well do the problem resistors while in there recapping it.
>
>
>Barry
>
>_______________________________________________
>R-390 mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/r-390