[R-1051] Speaker hook up

[Nick England]

Do you mean low audio or absolutely no audio?
Yes you should be able to hear something (not a lot, but something) via a
600 ohm speaker.
Can you hear anything via the headphone jack?
Are you hooked up to the correct USB or LSB connector?
I've never used anything other than the headphone jack on an R-1051.

Weird - looking at my R-1051 manual (94841(A) Change 3) , the two-pin audio
connectors J5 and J6 aren't connected to anything inside the cabinet! See
schematic 5-1A sheet 1.
The audio line outputs go to pins on J4, but that's all. Is this a
schematic error or what?
The schematic in 0967-LP-970-9010 is redrawn and does show the J5 and J6
connections.

Nick England K4NYW
www.navy-radio.com


On Sun, Jun 21, 2020 at 11:25 AM GRIECO <tgrieco at optonline.net> wrote:

> I have an R-1051B receiver plus 600 0hm speakers, two pin plug for back of
> unit and want to hook it up. I believe I'm missing something because no
> audio. Do I need a transformer or something ??
>
> Deleted
> ______________________________________________________________
> R-1051 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-1051
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-1051 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>