[R-1051] R-1051 Speakers
Tom Chirhart
k4ncg at yahoo.com
Wed Nov 20 13:35:36 EST 2019
Paul, as a Retired Chief Radioman I think I can speak freely.. the LS-474 is only needed by the collector that wants everything original. Same for the LS-206 for the die hard R-390 crowd. Most speakers with a matching transformer will work. Using the audio patch panels in Radio Central we could patch any receiver to any speaker or multiple speakers throughout the ship. We patched speakers to the bridge etc.. I use amplified Radio Shack speakers routinely but the flashback memories is why I have the matching speakers...
best 73’s to all us R-1051 owners out there.. if you are headed South along I-95 in Virginia I might have an interest in your R-1051. Send photos! I’m in Virginia just 5 miles south of Quantico...
Tom
Sent from my iPad
> On Nov 20, 2019, at 10:00 AM, paul swed <paulswedb at gmail.com> wrote:
>
> With respect to speakers I also use a set of high end broadcast monitors
> for my r1051. Only because I could. But for the various BC312/348 class
> radios its the cheap and cheerful stereo speakers available through many
> computer stuff sellers. What works quite well are inland technology's for
> $8 as I recall.
> Granted none of these are official R1051 speakers. In fact aboard the ships
> that I served on the radios always went to switchboards that directed the
> audio to various locations that had a amplifier and then various size
> speakers.
> Regards
> Paul
> WB8TSL
>
> On Wed, Nov 20, 2019 at 8:58 AM Guido Santacana <gsantacanav at gmail.com>
> wrote:
>
>> I used to feed the audio of my 1051B into a shelf speaker through a 600 to
>> 8 ohm matching transformer. It works ok. Lately I have connected a small
>> Radio Shack Mono Audio amplifier to the audio output. It provides better
>> control of tone and much better audio.
>>
>> 73s
>> Guido KP4FAR
>>
>> On Wed, Nov 20, 2019 at 9:42 AM Steve Hobensack <
>> stevehobensack at hotmail.com>
>> wrote:
>>
>>> Bookshelf speakers work nice. You need two of them. Use 12v filament
>>> transformers to match impedance. Its not an exact match but close. Hook
>> the
>>> 120v side to the radio and the 12v side to the speaker.
>>> N8YE
>>> ______________________________________________________________
>>> R-1051 mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/r-1051
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:R-1051 at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> R-1051 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/r-1051
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:R-1051 at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> R-1051 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-1051
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-1051 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the R-1051
mailing list