[R-1051] diagnosing dead bands

[David Wise]

You're very welcome, Mark.  If you can't find that NAVSHIPS manual, I'll try to find the link again.
I can't remember, but disassembly required at least a 0.050" wrench, maybe even .040 or .030 .

Dave Wise
SWL in Hillsboro, Oregon

-----Original Message-----
From: r-1051-bounces at mailman.qth.net [mailto:r-1051-bounces at mailman.qth.net] On Behalf Of Mark Richards
Sent: Monday, March 31, 2014 10:05 AM
To: R-1051 Discussion Group
Subject: Re: [R-1051] diagnosing dead bands

Thank you David.

Now I have to find a very tiny hex wrench :)

/m

On 03/31/2014 12:24, David Wise wrote:
> Posted July 31, 2012.  I include it here as an attachment and as plain text.
>
> From:	r-1051-bounces at mailman.qth.net on behalf of David Wise [David_Wise at Phoenix.com]
> Sent:	Tuesday, July 31, 2012 4:03 PM
> To:	R-1051 Discussion Group
> Subject:	[R-1051] Update - Pretty Much Working
>
> I found a procedure for removing the 1MC motor in
> NAVSHIPS 0967-034-2000 (Technical Manual for Repair of
> AN/WRC-1 and R-1051/URR 2N Modules), which I got from
> Al Parker's boatanchors site after discovering the
> link in the mail archive.  It's paragraph 3-5.

______________________________________________________________
R-1051 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-1051
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-1051 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html