[R-1051] WTB: Megacycle Synthesizer

[Ray Fantini]

Additional thought, disassemble all motors and clean and lubricate! In many cases they have not moved in twenty or so years.  Lots of the old aircraft radios and antenna tuners I have worked with have their motors and servos seized solid and will only turn after disassembly and lubrication, if you don't do this you can end up with servos with burnt windings and then you're in for more of a problem.
RF

-----Original Message-----
From: r-1051-bounces at mailman.qth.net [mailto:r-1051-bounces at mailman.qth.net] On Behalf Of Al Klase
Sent: Tuesday, October 01, 2013 12:11 PM
To: R-1051 at mailman.qth.net
Subject: [R-1051] WTB: Megacycle Synthesizer

Folks,

I'm attempting to resurrect a URC-35.  The MEGACYCLE SYNTHESIZER - ASSY
A70795-001 has a jammed motor.  (I knew real radios had motors, but this is ridiculous.)

Is anybody sitting on spares or parts sets.  I believe it's the same module as the R-1051.  Thought I'd ask before surgery.

Al

--
Al Klase - N3FRQ
Jersey City, NJ
http://www.skywaves.ar88.net/

______________________________________________________________
R-1051 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-1051
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-1051 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html