[R-1051] Update - Pretty Much Working

[David Wise]

I forgot to mention, I concocted some module hold-down bolts,
using 10-32 threaded rod, 10-32 threaded spacers, and Loctite Blue.
I got the threaded rod at my local Ace Hardware.  Call before you
go to make sure they stock it and not just 10-24.

Cut a 5" length of rod, and using a Dremel tool with grinding-stone bit,
grind off the appropriate length of thread to make the plain shank
at the bottom, thread a spacer on so it's even with the top of the shank,
and secure it with thread-locker.  Then thread another spacer on at the
top end, secure it, and after it's set, grind a slot for screwdriver.
Works great, and the hardware only cost a few bucks.

Dave Wise

>
>On Tue, Jul 31, 2012 at 7:03 PM, David Wise 
><David_Wise at phoenix.com> wrote: