[R-1051] 100CPS Synth Schematic

[John Schmitz]

Francesco,
Thanks for the offer. I think I'll hold off a bit as I have completed the
rewiring on the chassis and switch for the modification and am working on
etching the circuit board. Now I'm eager to see it work and I need to verify
the procedure before I put it on the web as well. I will keep you mind
though and really do appreciate the offer.

John


-----Original Message-----
From: r-1051-bounces at mailman.qth.net
[mailto:r-1051-bounces at mailman.qth.net]On Behalf Of Francesco Ledda
Sent: Monday, March 05, 2007 6:54 AM
To: R-1051 Discussion Group
Subject: RE: [R-1051] 100CPS Synth Schematic

I have a 500 CPS synthesizer that I am willing to exchange for the 100 CPS
you have.  Please, let me know if you are interested.

Regards,

Francesco Ledda
Garland, Texas







-----Original Message-----
From: r-1051-bounces at mailman.qth.net
[mailto:r-1051-bounces at mailman.qth.net]On Behalf Of John Schmitz
Sent: Monday, March 05, 2007 6:45 AM
To: R-1051 Discussion Group
Subject: RE: [R-1051] 100CPS Synth Schematic


Al,
Thanks, got the scans. The test was successful, I was able to get the 100cps
synth to produce the correct outputs for 000 and 500 so I'm going ahead with
the build out of the modification. I will post it up on the web when I get
it done. Will probably take me a week or so.

Thanks to all who responded.

John


-----Original Message-----
From: r-1051-bounces at mailman.qth.net
[mailto:r-1051-bounces at mailman.qth.net]On Behalf Of Al Parker
Sent: Sunday, March 04, 2007 12:56 PM
To: R-1051 Discussion Group
Subject: Re: [R-1051] 100CPS Synth Schematic

Hi guys,
    I've scanned the 100 cps Synthesizer Schem., in 4 pgs, overlapped a
little, you'll have to cut & paste.  The att. won't go thru the reflector,
just to the 2 who asked, but if anyone else wants it, let me know.
    This is from the R-1051D manual.  My "B" manual isn't complete, I
don't know if there are any differences in this module.  (my R-1051 manual
also is even less complete, I think Andy M has the diagrams for it on his
website.)
73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.boatanchors.org
http://www.hammarlund.info

========================
(got this the first time)

   ----- The following addresses had permanent fatal errors -----
<r-1051 at mailman.qth.net>
    (reason: 550 Error: 554  SPAM-ID: H000A Your message has an
attachment. We don't accept attachments.  See http://mailman.qth.net/)

   ----- Transcript of session follows -----
... while talking to mailman.qth.net.:
>>> DATA
<<< 550 Error: 554  SPAM-ID: H000A Your message has an attachment. We
don't accept attachments.  See http://mailman.qth.net/
554 5.0.0 Service unavailable


_______________________________________________
R-1051 mailing list
R-1051 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-1051


_______________________________________________
R-1051 mailing list
R-1051 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-1051

_______________________________________________
R-1051 mailing list
R-1051 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-1051